Ground Fuel Tank
- ERMA approved: fully complies with new regulations
- Design certified TNK0603
- Fabrication certified ERMAFAB0003
- Heavy duty construction using steel throughout
- K3 semi rotary hand pump
- 3m fuel delivery hose and auto shut off nozzle
- Fuel filter with clear plastic bowl and water drain
- Dipstick
- Safety pressure relief valve and automatic suction breather
- Paint system rust inhibitor and single pot top coat
- Lifting lug
- For use with diesel and petrol
- Standard Sizes: 500, 1000, and 1995 litres
|
On Stand Gravity Feed Fuel Tank
- ERMA approved: fully complies with new regulations
- Design certified TNK0604
- Fabrication certified ERMAFAB0003
- Heavy duty construction using steel throughout
- Lockable valve
- 3m fuel delivery hose and auto shut off nozzle
- Fuel filter with clear plastic bowl and water drain
- Dipstick
- Safety pressure relief valve and automatic suction breather
- 1.4m stand
- Paint system rust inhibitor and single pot top coat
- Lifting lug
- For use with diesel and petrol
- Standard Sizes: 500, 1000, and 1995 litres
|
Trailer Tank
- Certified by Test Certifier
- Fabrication certified ERMAFAB0003
- Heavy duty construction using steel throughout
- Honda 4HP motor with auto shut off when oil gets low (lockable)
- 3m fuel delivery hose and auto shut off nozzle
- Fuel filter with clear plastic bowl and water drain
- Dipstick
- Safety pressure relief valve and automatic suction breather
- Paint system rust inhibitor and single pot top coat
- Lifting lug
- For use with diesel only
- Standard Size: 1300 litres
|
Large On-ground Fuel Tank
- Design certified TNK0603
- Fabrication certified ERMAFAB0003
- Heavy duty construction using steel throughout
- Honda 4HP motor with auto shut off when oil gets low (lockable)
- 5m fuel delivery hose and auto shut off nozzle
- Fuel filter with clear plastic bowl and water drain
- Dipstick
- Safety pressure relief valve and automatic suction breather
- Paint system rust inhibitor and single pot top coat
- Lifting lug
- For use with diesel only
- Standard Sizes: 1800, 5000, 10,000 and 20,000 litres
|
Ute Tank
- Certified by Test Certifier
- Fabrication certified ERMAFAB0003
- Heavy duty construction using steel throughout
- 12v or 24v battery kit (lockable)
- 3m fuel delivery hose and auto shut off nozzle
- Safety pressure relief valve and automatic suction breather
- Paint system rust inhibitor and single pot top coat
- Lifting lug
- For use with diesel only
- Standard Sizes: 300, 500, and 800 litres
|
Fuel Storage Systems Ltd (FSS)- Sebco™ 4800 Plastic Diesel Tank Fuel Storage Systems Ltd (FSS)-
Sebco™ Plastic Diesel Tanks
Fuel Storage Systems Ltd (FSS) use the brand name Sebco™ for its range of above-ground fuel storage systems. The products available are:
- 990 litre 12 volt pumping non-bunded system for Diesel Fuel
- 2,300 litre fully integrated bunded system for Diesel Fuel
- 4,750 litre fully integrated bunded system for Diesel Fuel
- 10,000 litre fully integrated bunded system
All Sebco™ tanks are HSNO compliant, constructed to an ERMA approved Code of Practice, and are built to ISO9001 standards.
Specifications for Sebco™ 4800 Diesel Station
- Tank Type: Bunded storage and dispensing tank
- Orientation: Vertical
- Location: Above Ground
- Safe Fill Level: 4750 litres
- Diameter: 2400mm
- Height: 2350mm
- Inspection Aperture: 135mm
- Venting: 135mm
- Colour: Blue / Grey or alternatives at extra cost.
- Country of Manufacture: New Zealand
- Manufacturer: Fuel Storage Systems Limited
- Address: Company Road, Ashburton, South Canterbury
- Telephone: 0800 4 SEBCO (0800 473 226)
- Website: www.sebco.co.nz
- Material Type: Diesel Grade PE
- Chemical Stability: Diesel
- Ultra Violet Stabilised: Yes
- Fill Point: Ground level filling with 50mm Cam Lock or Direct fill
- Security: Lockable access door with pump isolation switch
- Dispensing: Via automatic nozzle / 4 metre flexible hose
- Additional Fittings: Choice of 240v or 12v pumping systems, Automatic nozzle, Flow meter, Remote Electronic Gauge, Bund warning alarm, Bulkhead light, Tie down points (for wind effected zones)
- Quality Assurance: HSNO Compliant — ERMA Approved Code of Practice, ISO9001
- Installation Requirements: As per supplied technical instruction book. All electrical connections to be made by a registered Electrician.
- Maintenance Requirements: As per supplied technical instruction book.
Important Notice: All the information supplied is understood to be correct at the time of publication. However, FSS has a policy of continued improvement, so has the right to amend product specifications without notice.
Compliance: From 1 April 2007, an existing tank over 2000 litres must comply with one of the following:
- be bunded; or
- be managed in accordance with a code of practice or compliance plan which sets out a programme for bringing the tank into compliance with HSNO or otherwise provides a satisfactory means of environmental protection.
Click here to view and download additional product information about Sebco™ Diesel Stations. |
Fuel Storage Systems Ltd (FSS) - Sebco™ 2300 Plastic Diesel Tanks Fuel Storage Systems Ltd (FSS) use the brand name Sebco™ for its range of above-ground fuel storage systems. The products available are:
- 990 litre 12 volt pumping non-bunded system for Diesel Fuel
- 2,300 litre fully integrated bunded system for Diesel Fuel
- 4,750 litre fully integrated bunded system for Diesel Fuel
- 10,000 litre fully integrated bunded system
All Sebco™ tanks are HSNO compliant, constructed to an ERMA approved Code of Practice, and are built to ISO9001 standards.
Specifications for Sebco™ 2300 Diesel Station
- Tank Type: Bunded storage and dispensing tank
- Orientation: Vertical
- Location: Above Ground
- Safe Fill Level: 2300 litres
- Diameter: 1950mm
- Height: 2100mm
- Inspection Aperture: 120mm
- Venting: 120mm
- Colour: Blue / Grey or alternatives at extra cost.
- Country of Manufacture: New Zealand
- Manufacturer: Fuel Storage Systems Limited
- Address: Company Road, Ashburton, South Canterbury
- Telephone: 0800 4 SEBCO (0800 473 226)
- Website: www.sebco.co.nz
- Material Type: Diesel Grade PE
- Chemical Stability: Diesel
- Ultra Violet Stabilised: Yes
- Fill Point: Ground level filling with 50mm Cam Lock or Direct fill
- Security: Lockable access door with pump isolation switch
- Dispensing: Via automatic nozzle / 4 metre flexible hose
- Additional Fittings: Choice of 240v or 12v pumping systems, Automatic nozzle, Flow meter, Remote Electronic Gauge, Bund warning alarm, Bulkhead light, Tie down points (for wind effected zones)
- Quality Assurance: HSNO Compliant — ERMA Approved Code of Practice, ISO9001
- Installation Requirements: As per supplied technical instruction book. All electrical connections to be made by a registered Electrician.
- Maintenance Requirements: As per supplied technical instruction book.
Important Notice: All the information supplied is understood to be correct at the time of publication. However, FSS has a policy of continued improvement, so has the right to amend product specifications without notice.
Compliance: From 1 April 2007, an existing tank over 2000 litres must comply with one of the following:
- be bunded; or
- be managed in accordance with a code of practice or compliance plan which sets out a programme for bringing the tank into compliance with HSNO or otherwise provides a satisfactory means of environmental protection.
Click here to view and download additional product information about Sebco™ Diesel Stations. |
Promax Platinum Series Diesel Tanks Enough room under the lid to store hose, nozzle & electrical cables. Flow meter can also be mounted under cover also.
Features:
• ¾” auto shut-off nozzle
• Swivel to preventhose tangles
• Nozzle lock plate
• Anti-kink spring fittedto hose
• 6m of 20mm anti-staticdelivery hose
• ¾” drain bung
• 4m of electrical cablewith battery clips
• Fluid 40 litre/min pump
• On/off switch on pump
• Bypass valve integratedin pump body
• Reinforced & removablepivot for lid
• Easy cleansuction strainer
• Pad-lockable filler lid Protect your investment with these Platinum Series Diesel Tanks
Standard Sizes: 200 and 400 litres |
Promax Platinum Series Diesel Tanks Features:
• Swivel to prevent tangles
• 4m of electrical cable with battery clips
• Earth strap to prevent static build up when filling tank
• 6m of 25mm delivery hose
• 1” auto shut-off nozzle
• Fluid 60 litre/min pump
• ¾” auto shut-off nozzle
• Swivel to prevent hose tangles
• Nozzle lock plate
• Anti-kink spring fitted to hose
• 6 metres of 20mm anti-static delivery hose
• ¾” Drain bung
• 4 metres of electrical cable with battery clips
• Fluid 40 litre/min pump
• On/off switch on pump
• Bypass valve integrated in pump body
• Reinforced & removable pivot for lid
• Easy clean suction strainer
• Pad-lockable filler lid
Standard Sizes: 600, 800, 1000, 1500 and 2000 litres |
Tank Security Device
RD Petroleum constantly updates our product range to meet the needs of our customers. After hearing that fuel theft was occurring on farms, we took up the challenge to design and produce a product that would reduce the opportunity for fuel theft.
The result is our new tank security device "Fuelsafe", which is available now to RD Petroleum customers.
Key features include:
- made of robust steel construction
- removes need for padlock
- no disassembly required in operation
- easy to fit - RD Petroleum will provide free fitting to its customers
- supplied with 2 keys.
"Fuelsafe" can protect both tap and lever fuel tank mechanisms (as illustrated).
If you want to reduce the possibility of fuel theft on your farm, please contact us to order a "Fuelsafe" tank security device for your peace of mind. |
3 metre Fuel Delivery Hose
- 3 metre Fuel Delivery Hose
|
Sigma K3 Semi Rotary Hand Pump
- 29 litres per minute
- Suitable for petrol and diesel
|
Piusi Battery Kits
- 12V and 24V options
- Suitable for diesel only
- Includes 2 metre electrical cable with clips,
- 4 metre fuel hose, aluminium hand nozzle, bottom filter for intake tube, Carry 2000 pump
- Suction capacity up to 2 metres
- Flow rate of 38 litres per minute
|
Piusi Carry 2000 Pump
- Displacement, self-priming pump for diesel transfer
- Cast iron pump body, finished with anti-corrosion paint
- Vane pump with sintered steel rotor and acetal resin vanes
- By-pass valve incorporated in the pump body
- Direct current brush motor with permanent magnetic stator
- Motor protection grade IP55
- Intermittent service, 30 min cycle
- Pump attachment support bracket
|
Piusi Cube 56 Diesel Fuel Distributor Diesel only
Flow rate up to 56 litres per minute
Continuous operation at 230V
Also available in 12V and 24V, with flow rate of 40 litres per minute
Noise level below 70dB
Precision of flow metre +/- 1%
Pedestal optional
|
Piusi Cube 70 Diesel Fuel Distributor
- Diesel only
- Flow rate up to 70 litres per minute
- Continuous operation at 230V
- Noise level below 70 dB
- Precision of flow metre +/- 1%
- Pedestal optional (as pictured)
|
Piusi Cube 70MC Diesel Fuel Distributor
- Diesel only
- Flow rate up to 70 litres per minute
- Continuous operation at 230V
- Multi-user electronic unit capable of up to 50 users
- Electronic control unit with display and keypad for entering code numbers
- Data-capable, for download to PC
- Local memory capable of storing the last 200 deliveries
- Can accept vehicle registration numbers and odometer readings
- Records date and time of dispensing
- Magnetic keys for user identification
- Pedestal optional
|
Key Kits for Cube 70MC
- 1 Manager key + 10 user keys + key reader + software
|
Self 3000 Diesel and Petrol Spouts
- Capable of 150 litres per minute
- Weight 0.6 kg
|
Piusi A120 Automatic Nozzle
- Automatically shuts off flow when tank is full
- Swivel connector
- Comfortable grip
- Capable of 120 litres per minute
- Suitable for diesel and petrol
|
Piusi A280 Automatic Nozzle
- Automatically shuts off flow when tank is full
- Swivel connector
- Comfortable grip
- Capable of 280 litres per minute
- Suitable for diesel and petrol
|
Piusi K33 Mechanical Flow Metre
- Nutating disk metre measuring exact quantity of fuel dispensed
- Reliable, inexpensive, easy to install, simple to calibrate at the workplace
- Flow rate range 20 — 120 litres per minute
- 3 digit sub-totals (maximum 999 litres), 6 digit totals
|
Piusi K24 Turbine Digital Flow Metre Turbine measuring system
Reinforced polyamide body
Polypropylene turbine
Threaded input/output 1 Gas (NPT), aligned male/female depending on version
Pulser type signal: single channel, reed switch
Electronic card with LCD display:
Partial 5 figures from 0.1 to 99999
Total 6 figures from 1 to 999999
Total resetting available
Flexible Display - can be rotated 360 degrees, to 4 different positions
Flow indication
Batteries: n. 2 batteries size AAA
Performance Data:
- Precision +/- 1% within the flow range
- Repetitiveness 0.2%
- Maximum flow rate of 120 litres per minute
- Working Temperature -10 / 50 degrees Celsius
- Loss of pressure <0.15 bar (120 litres per minute with diesel fuel)
- Can be calibrated
|
NS10 Filter
|
Brass Locking Cap
|
Fuel Storage Systems Ltd (FSS)- 
Fuel Storage Systems Ltd (FSS) use the brand name Sebco™ for its range of above-ground fuel storage systems. The products available are:
Enough room under the lid to store hose, nozzle & electrical cables. Flow meter can also be mounted under cover also.
Features:
Diesel only
Turbine measuring system
